Yakima River Basin Water Storage Feasibility Study

Home | Reports/Documents | News Releases | Photos | Email List | Contact Us

USGS 2D Hydraulic Modeling - Habitat Class (Polygon)

Metadata

Identification_Information:
Citation:
Citation_Information:
Originator: Upper Columbia Area Office, USDI Bureau of Reclamation
Publication_Date: 6/26/2008
Publication_Time:
UnknownTitle: YFO_Wapato_Reach_habitat_class_poly_1491cfs
Geospatial_Data_Presentation_Form: vector digital data
Online_Linkage: \\IBR1EYOUNGD01\C$\Data_2_SDE_prep\test47filegd.gdb

Description:
Abstract: Habitat classes (pool, glide, riffle) propagated to a continuous surface from the two dimensional hydraulogic modeling information for a specific reach and flow level listed in the data sets name.

Purpose: This is part of a larger study known as the Yakima River Basin Water Storage Feasability Study (YRBWSFS). The modeling was conducted to support analysis of how fish habitats change in the reach specified in this data sets name, based on flow variations. The final data sets will be used to help determine how fish habitat will be effected by potential new water storage options.
upplemental_Information: This data set is part of a larger set of information.

Below is a listing of the modeled flows for each reach: Easton Reach - 250, 500, 700, 900, 1100, 1300, 1500, 1750, 2000 Kittitas Reach - 667, 800, 1032, 1288, 1700, 2311, 2770, 2864, 3146, 4000, 5000, 6500, 8000, 10000 Naches Reach - 250, 500, 720, 1000, 1500, 2000, 2680, 3000, 4000, 6000, 8000 Union Gap Reach - 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000 Wapato Reach - 300, 500, 750, 1491, 2000, 2450, 5000, 7500, 15000

For each flow level, the following data sets have been produced from the 2D hydraulic modeling: model points, water depth, water extent, water surface area, water velocity, habitats.

The following reaches in the Yakima River Basin have had similar data produced: Easton, Kittitas, Naches, Union Gap, Wapato

Reclamation conducted the 2D hydraulic modeling for the Easton, Kittitas, and Naches reaches. The USGS conducted the 2D hydraulic modeling for the Union Gap and Wapato reaches. Therefore, separate metadata files have been developed for these two sets of information.

Time_Period_of_Content:
Time_Period_Information:
Single_Date/Time:
Calendar_Date: 2006
Time_of_Day: unknown
Currentness_Reference: ground condition
Status: Progress: Complete
Maintenance_and_Update_Frequency: None planned

Spatial_Domain:
Bounding_Coordinates:
West_Bounding_Coordinate: -120.441953
East_Bounding_Coordinate: -120.333532
North_Bounding_Coordinate: 46.496717
South_Bounding_Coordinate: 46.419318

Keywords:
Theme:
Theme_Keyword_Thesaurus: None
Theme_Keyword: Habitat
Theme_Keyword: Fish
Theme_Keyword: Riparian
Theme_Keyword: In-Stream Habitat
Theme_Keyword: hydrology
Theme_Keyword: water

Place:
Place_Keyword_Thesaurus: None
Place_Keyword: Pacific Northwest
Place_Keyword: Washington
Place_Keyword: Yakima Basin

Access_Constraints: The USDI Bureau of Reclamation (Reclamation) provides public domain spatial data without restrictions. Access to spatial data that are considered 1) works in-progress, 2) for internal use, or 3) confidential, sensitive, or private may be restricted. Access to such data may require a Freedom of Information Act (FOIA) request. For further information, contact the Geospatial Data Administrator (see Point of Contact info).

Use_Constraints: The USDI Bureau of Reclamation (Reclamation) provides spatial data """"""""as-is"""""""" without warranty of any kind, expressed or implied, including but not limited to, any warranties of fitness for a particular purpose. The burden for determining fitness for use lies entirely with the user. In no event will the producers of Reclamation spatial data be liable for any damages arising from the use of, or the inability to use, these data. The user assumes all responsibility for spatial and attribute accuracy, completeness, validity, and appropriateness with regard to the suitability of these spatial data for any specific use or application, and such use or application is at the user?s own risk.

Point_of_Contact:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: Upper Columbia Area Office, USDI Bureau of Reclamation
Contact_Position: GIS Specialist
Contact_Address:
Address_Type: mailing and physical address
Address: US Bureau of Reclamation Box 1749 1917 Marsh Road
City: Yakima
State_or_Province: WA
Postal_Code: 98907-1794
Country: USA
Contact_Voice_Telephone: 509-575-5848
Contact_Facsimile_Telephone: 509-454-5611
Contact_Electronic_Mail_Address: eyoung@pn.usbr.gov
Hours_of_Service: 0730-1600
Contact_Instructions:

Data_Set_Credit: James Hatten and Tom Batt of the U.S Geological Survey, Biological Resources Division, Western Fisheries Research Center, Columbia River Research Laboratory. Developed the original 2D hydraulic modeling work this dataset is based on.

The contact information for the original 2D hydraulic modeling work at the time this metadata was completed is: Tom Batt tbatt@usgs.gov 509-538-2299

Native_Data_Set_Environment: Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.3.0.1770

Data_Quality_Information:
Attribute_Accuracy:
Attribute_Accuracy_Report: Bureau of Reclamation's UCAO office received the modeling data from the USGS and have modified minor parts of it. The changes below could have resulting in some inaccuracies of the valiables of this original 2D modeling data, although it would be very minor. This is described in more detail at the end of the "Process Step" section. 1) Water surface elevation and water depth values for locations with a froude number of 0 were changed to -3.2808 (null value used in USBR modeled areas). 2) Water velocity values were changed to a value of 0 (to be consistent with USBR modeled areas) for locations with a froude number of 0.

Logical_Consistency_Report: raster topology exists
Completeness_Report: Completely finished for the project areas. The modeling was completed for the following reaches: Easton, Kittitas, Naches, Union Gap, Wapato.

Water variables were simulated from a two dimensional hydrodynamic model starting at rivermile 103.8, 1/4 mile south of Sunnyside diversion dam, and ending at rivermile 93.7, 1 .5 miles north of SR22 bridge at Toppenish.

Positional_Accuracy:
Horizontal_Positional_Accuracy:
Horizontal_Positional_Accuracy_Report: Final accuracy unknown, but positional data used for hydrodynamic modeling was collected using USGS bathymetric sonar, RTK GPS and Total Station data. Also, the propagation of the modeling point outputs to a continuous surface adds error, especially around the river edges.

Quantitative_Horizontal_Positional_Accuracy_Assessment:
Vertical_Positional_Accuracy:
Vertical_Positional_Accuracy_Report: Final accuracy unknown, but positional data used for hydrodynamic modeling was collected using USGS bathymetric sonar, RTK GPS and Total Station data.

Also, the propagation of the modeling point outputs to a continuous surface adds error, especially around the river edges.

Quantitative_Vertical_Positional_Accuracy_Assessment:
Vertical_Positional_Accuracy_Value: 0.15
Vertical_Positional_Accuracy_Explanation: Accuracy range is 2cm for total station and RTK elevation to 15cm for sonar data.

Lineage:
Source_Information:
Source_Citation_Abbreviation: USGS; WRD
Source_Contribution: Provided part of the underlying bathymetry used to generate the Riv2D Bed file.

Process_Step:
Process_Description: This dataset is propagated from a two dimensional hydraulic modeling output. The modeling output almost always had points representing areas of flow being fully encompassed by points representing land, thereby having a river's edge boundary worked into the data.

The original modeling output designated areas which were disconnected from the main river network. These areas were considered non-habitat and eliminated from the final outputs.

The 'euclidean allocation' tool in ESRI's ArcGIS 9.x software was used to create this data set from the point outputs of the original modeling work. A distance limitation of 75 feet and cell size of 2 foot were used. The output was then converted into polygon format using the 'Raster to Polygon' tool in the same ESRI software.

A description of the original two dimensional hydraulic modeling work follows:

Model ouput variables were estimated for the Gap Reach of the Yakima River under steady-state flow by means of two-dimensional hydrodynamic modeling. The River 2D model used a two-dimensional finite element method to solve the two-dimensional shallow water flow equations. For a detailed explanation of the model, see Ghanem, A.H., P.M. Steffler, F.E. Hicks, and C. Katopodis, 1995, Two-dimensional finite element modeling of aquatic habitats:, Water Resources Engineering Report No. 95-S1, Department of Civil Engineering, University of Alberta, Edmonton, Alberta. The conditions simulated were for a flow of 283.17 cu. m/s with a downstream water surface elevation of 288.5 m. The bed elevation surface upon which the hydrodynamic simulation was based was derived from multiple survey methods ranging from USGS boat surveys to total station data collected in small secluded sections of this reach. Final mesh was irregulary spaced varying between 2.5 to 25 meters. Final CDG files from River2D were imported into ArGIS. The final data set is in the form of a ArcGIS shapefile.

Bureau of Reclamation's UCAO office received the modeling data from the USGS and have modified minor parts of it. The changes are listed below: 1) Metadata keywords changed to include both location and theme information. 2) Attribute names changed to reflect same naming convertions of USBR modeling work. 3) Vertical and horizontal accuracies changed from a value representing units in centimeters to units in meters. 4) Water surface elevation and water depth values for locations with a froude number of 0 were changed to -3.2808 (null value used in USBR modeled areas). For the Union Gap Reach at any modeled flow, this effected less that 0.0004% of the total 2D modeling points in the entire data set and less than 0.0034% of the pool designated 2D modeling points. The average depth of water in these areas was 0.7 inches. 5) Water velocity values were changed to a value of 0 (to be consistent with USBR modeled areas) for locations with a froude number of 0. 6) Certain attributes were deleted.

Process_Contact:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: Upper Columbia Area Office, USDI Bureau of Reclamation
Contact_Position: GIS Specialist

Contact_Address:
Address_Type: mailing and physical address
Address: 1917 Marsh Road
City: Yakima
State_or_Province: WA
Postal_Code: 98901
Country: USA
Contact_Voice_Telephone: (509) 575-5848
Contact_Facsimile_Telephone: (509) 454-5611
Contact_Electronic_Mail_Address: eyoung@pn.usbr.gov
Hours_of_Service: 0730-1600
Contact_Instructions:
Process_Date: 20081202
Process_Time: 09340500

Cloud_Cover: 0

Spatial_Data_Organization_Information:
Direct_Spatial_Reference_Method: Vector
Point_and_Vector_Object_Information:

SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: G-polygon
Point_and_Vector_Object_Count: 3153

SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: Label point
Point_and_Vector_Object_Count: 55

SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: GT-polygon composed of chains
Point_and_Vector_Object_Count: 55

SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: Point
Point_and_Vector_Object_Count: 4

Spatial_Reference_Information:
Horizontal_Coordinate_System_Definition:
Planar:
Map_Projection:
Map_Projection_Name: Lambert Conformal Conic
Lambert_Conformal_Conic:

Standard_Parallel: 45.833333
Standard_Parallel: 47.333333
Longitude_of_Central_Meridian: -120.500000
Latitude_of_Projection_Origin: 45.333333
False_Easting: 1640416.666667
False_Northing: 0.000000

Planar_Coordinate_Information:
Planar_Coordinate_Encoding_Method: coordinate pair
Coordinate_Representation:

Abscissa_Resolution: 0.000328
Ordinate_Resolution: 0.000328

Planar_Distance_Units: survey feet

Geodetic_Model:
Horizontal_Datum_Name: North American Datum of 1983
Ellipsoid_Name: Geodetic Reference System 80
Semi-major_Axis: 6378137.000000
Denominator_of_Flattening_Ratio: 298.257222

Vertical_Coordinate_System_Definition:
Altitude_System_Definition:
Altitude_Resolution: 1.000000
Altitude_Encoding_Method: Explicit elevation coordinate included with horizontal coordinates

Entity_and_Attribute_Information:
Detailed_Description:
Entity_Type:
Entity_Type_Label: YFO_Wapato_Reach_habitat_class_poly_1491cfs
Entity_Type_Definition: Polygon attribute table
Entity_Type_Definition_Source: Denver Technical Services Center, USDI Bureau of Reclamation

Attribute:
Attribute_Label: OBJECTID
Attribute_Definition: Internal feature number.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:

Enumerated_Domain:
Enumerated_Domain_Value: 1
Enumerated_Domain_Value_Definition: pool

Enumerated_Domain:
Enumerated_Domain_Value: 2
Enumerated_Domain_Value_Definition: glide

Enumerated_Domain:
Enumerated_Domain_Value: 3
Enumerated_Domain_Value_Definition: riffle

Enumerated_Domain:
Enumerated_Domain_Value: 4
Enumerated_Domain_Value_Definition: land
Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated.

Attribute:
Attribute_Label: Shape
Attribute_Definition: Feature geometry.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain: Coordinates defining the features.

Attribute:
Attribute_Label: habitat

Attribute:
Attribute_Label: Shape_Length
Attribute_Definition: Length of feature in internal units.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain: Positive real numbers that are automatically generated.

Attribute:
Attribute_Label: Shape_Area
Attribute_Definition: Area of feature in internal units squared.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain: Positive real numbers that are automatically generated.
Overview_Description:
Entity_and_Attribute_Overview: Contains attributes on the fish habitat classifications

Distribution_Information:
Distributor:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: Upper Columbia Area Office, USDI Bureau of Reclamation
Contact_Position: GIS Specialist

Contact_Address:
Address_Type: mailing and physical address
Address: US Bureau of Reclamation Box 1749 1917 Marsh Road
City: Yakima
State_or_Province: WA
Postal_Code: 98907-1794
Country: USA
Contact_Voice_Telephone: 509-575-5848
Contact_Facsimile_Telephone: 509-454-5611
Contact_Electronic_Mail_Address: eyoung@pn.usbr.gov
Hours_of_Service: 0730-1600
Contact_Instructions:

Resource_Description: U. S. Bureau of Reclamation's Yakima River Basin Database
Distribution_Liability: The USDI Bureau of Reclamation (Reclamation) provides spatial data ""as-is"" without warranty of any kind, expressed or implied, including but not limited to, any warranties of fitness for a particular purpose. The burden for determining fitness for use lies entirely with the user. In no event will the producers of Reclamation spatial data be liable for any damages arising from the use of, or the inability to use, these data. Reclamation liability is limited to providing a replacement copy for requested data sets that are not readable upon receipt.

The user assumes all responsibility for spatial and attribute accuracy, completeness, validity and appropriateness with regard to the suitability of these spatial data for any specific use or application, and such use or application is at the user?s own risk.

Spatial data provided by the Reclamation are public domain, and the recipient may not assert any proprietary rights thereto nor represent data sets as other than government-produced data.
Standard_Order_Process:
Fees: No fees for electronic download. Processing, media, and shipping fees may apply for CD-ROM requests.
Ordering_Instructions: Contact Geospatial Data Administrator or GIS Coordinator for custom data requests.
Turnaround: Processing time and delivery will vary depending on the size and complexity of the request.
Standard_Order_Process:
Fees: Actual costs to produce cartographic products, including labor, plotting costs, and shipping.
Ordering_Instructions: Contact the Geospatial Data Administrator or GIS Coordinator to request non-digital data products.
Turnaround: Processing time will vary with the specific request.
Custom_Order_Process: Contact Geospatial Data Administrator or GIS Coordinator for custom data requests.
Available_Time_Period:
Time_Period_Information:
Single_Date/Time:
Time_of_Day: unknown

Metadata_Reference_Information:
Metadata_Date: 20081202
Metadata_Review_Date: 20010814
Metadata_Contact:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: Upper Columbia Area Office, USDI Bureau of Reclamation
Contact_Person: REQUIRED: The person responsible for the metadata information.
Contact_Position: GIS Specialist

Contact_Address:
Address_Type: mailing and physical address
Address: US Bureau of Reclamation Box 1749 1917 Marsh Road
City: Yakima
State_or_Province: WA
Postal_Code: 98907-1794
Country: USA
Contact_Voice_Telephone: 509-575-5848
Contact_Facsimile_Telephone: 509-454-5611
Contact_Electronic_Mail_Address: eyoung@pn.usbr.gov
Hours_of_Service: 0730-1600
Contact_Instructions:
Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
Metadata_Standard_Version: FGDC-STD-001-1998
Metadata_Time_Convention: local time
Metadata_Access_Constraints: none
Metadata_Use_Constraints: none
Metadata_Security_Information:
Metadata_Security_Classification: Unclassified

Generated by mp version 2.9.6 on Tue Dec 02 09:45:19 2008

Last Updated: 8/19/20